Skip to main content
Air Conditioning Direct logo

Supply, installation and handover

Air Conditioning Supply and Installation Across Belfast and Northern Ireland

Air Conditioning Direct can take a confirmed project from the first discussion and equipment selection through supply, installation, commissioning and handover. The recommendation and the price come from the actual property, not from a package priced on a web page.

Cross section of a wall mounted air conditioning installationA room shown in section. An indoor unit is mounted high on the internal face of an external wall. Pipework and a condensate drain pass through a core drilled hole in the wall and run down the outside face to an outdoor unit standing outside the building, with a local electrical isolator between them. The six numbered markers match the six numbered parts of the job listed beneath the drawing.InsideOutside123456
A typical wall mounted installation shown in section. Drawn generically: it is not a specific manufacturer's equipment and it is not a photograph of a customer property.

What is actually being installed

The Six Parts of the Job

Each number on the drawing above, and what a good quotation should say about it.

  1. 1

    The indoor unit

    Mounted high on an external wall in most cases, because that is where the pipework can leave the room most directly. It needs clearance around it and a position that suits how the room is used, not just the nearest bit of empty wall.

  2. 2

    The core drilled hole

    A single hole through the external wall, angled slightly so water runs outward. This is the part people worry about, and it is the part that should be agreed with you before the drill comes out.

  3. 3

    Refrigerant pipework

    A pair of insulated pipes connecting the two units. Whether they can be concealed inside the fabric or need trunking down the outside face depends entirely on the property, and it should be explained to you beforehand.

  4. 4

    The outdoor unit

    Usually on wall brackets or a ground stand. It needs airflow around it, a route for the pipes, space to be serviced later, and a position that is acceptable visually and for noise, including to a neighbour.

  5. 5

    The condensate drain

    The indoor unit produces water when it cools. That water has to go somewhere sensible and continuously downhill. A poor condensate route is one of the most common causes of trouble later.

  6. 6

    The electrical supply and isolator

    The system needs a supply and a local means of isolation. What electrical work is included and who carries it out should be stated in the quotation, so there is no gap between trades.

Start to finish

A Complete Installation Process

  1. 1. Requirement discussion

    Establish whether the property is domestic or commercial, which rooms are involved, what you want the result to be, the location and any constraints.

  2. 2. Assessment and system selection

    Gather what is needed to recommend suitable capacity, equipment type and positions. This is never reduced to floor area alone.

  3. 3. Written quotation

    The equipment, the number of units, controls, routes, electrical assumptions, making good position, programme, warranty and exclusions, in writing.

  4. 4. Equipment supply

    The agreed equipment is sourced through appropriate channels. No stock availability, manufacturer status or lead time is claimed on this site without confirmation.

  5. 5. Installation

    The agreed indoor and outdoor work, the pipework, the drainage, the relevant connections and the finishing details, all within the confirmed scope.

  6. 6. Commissioning

    The installed system is checked and the relevant commissioning steps and records are completed for that equipment and that job.

  7. 7. Customer handover

    Controls, operating guidance, routine care, the warranty conditions and what servicing will be required from here.

Read before you sign

Clear Scope Before Work Begins

Use this as a checklist against any air conditioning quotation you receive, from anybody. A quote that leaves half of it unstated is where disputes come from.

The VAT position, payment schedule and validity period belong in the actual quotation for your job. They are not published here, because they depend on the project and on business status that has not been confirmed for publication.

  • Exact proposed equipment, and the model where available
  • Number of indoor and outdoor units
  • Controls or accessories included
  • Indoor unit positions
  • Outdoor unit positions
  • Pipework and trunking approach
  • Condensate route
  • Electrical work included, and excluded
  • Access equipment or special access
  • Core drilling and making good position
  • Disposal of packaging or removed equipment
  • Commissioning and documentation
  • Warranty duration and conditions
  • The servicing requirement

Equipment

Which System Will Be Proposed?

Air Conditioning Direct will discuss the rooms, the property and the installation requirements before recommending equipment. The proposed system and controls are identified in the written quotation.

You will notice this page names no system types and no manufacturers. That is deliberate. Which ranges are genuinely supplied has not yet been confirmed in writing, and listing equipment that might not be available would be no better than guessing on your behalf. Ask us what we propose for your property and why.

Compliance

Qualifications and Certification

Air conditioning installation and servicing can involve regulated refrigerants and electrical work. Certification claims matter, which is exactly why this website does not make any until the documents are in hand.

You will not find certification badges, regulator logos or vague blanket wording about qualifications anywhere on this site. When the relevant certification, its issuing body and its current status have been supplied and verified, it will be published here in specific terms, naming the organisation and what it actually covers. Until then, ask us directly and ask to see the paperwork. That is a reasonable thing to ask any installer, and a good one will not mind.

Long term reassurance

Minimum 5-Year Parts Warranty, Backed by Our Aftercare Service

All equipment supplied comes with a minimum five-year parts warranty when covered by our service and maintenance programme, supported by our dedicated aftercare service. Your quotation and the warranty terms should make clear the eligible equipment, product registration, any servicing requirement, the exclusions and how to report a problem.

Air Conditioning Direct will not tell you a warranty is unconditional when it is not. Ask for the written terms with your quotation, read what has to happen to keep it valid, and keep the paperwork.

Service area

Installations Across Belfast, Northern Ireland and the Republic of Ireland

Installations are carried out across Belfast and the surrounding towns, from Antrim and Ballyclare down through Hillsborough, Dromore and Moira, and elsewhere in Northern Ireland and the Republic of Ireland by arrangement. Confirm the site postcode when you enquire.

There is no distance limit published on this website, because a line on a map is not how the decision actually gets made. Send your postcode and you will get a straight answer either way.

Installation questions

Questions About Getting a System Fitted

The practical questions people actually ask once they have decided they want air conditioning.

Do you supply the equipment as well as installing it?

Yes, supply forms part of the service. The specific equipment and its price are confirmed in a written quotation once the requirement has been assessed, rather than sold as a fixed package.

Can I buy my own unit and ask you to fit it?

The policy on customer supplied equipment has not been confirmed yet, so this site will not promise either way. It matters, because suitability, condition, documentation, warranty and responsibility all work differently when the equipment did not come through the installer. Ask us directly.

How do you decide which system is right?

By looking at the space, how it is used, how much heat it gains, how many people occupy it, where the indoor and outdoor units can physically go, what controls you want and what installation route exists. The recommendation should be specific to the property, and you should be told why.

Where will the outdoor unit go?

The position turns on access, airflow around the unit, noise, how it looks, the pipe route, condensate drainage, room to service it later and any planning or property restrictions. It should be agreed with you before installation day, not chosen on the morning.

What should a good installation quotation actually tell me?

The proposed equipment and how many units, the controls included, the indoor and outdoor positions, the pipework and trunking approach, the condensate route, what electrical work is in or out of scope, any special access, the core drilling and making good position, commissioning and documentation, the warranty duration and conditions, and the servicing requirement.

What happens on the day of installation?

The agreed indoor and outdoor work is carried out, along with the pipework, drainage and connections within the confirmed scope, and the finishing details are completed. The route through the property and the areas that need protecting should have been agreed beforehand.

What is commissioning, and why does it matter?

Commissioning is the set of checks carried out once the system is physically installed, to confirm it is working correctly before it is handed over. It also produces the records that a manufacturer may require, so it is not a formality you should let anyone skip.

What happens after the installation is finished?

The system is commissioned, the controls and day to day operation are explained to you, and the relevant warranty and maintenance information is provided. If anything about the controls is unclear, ask at handover rather than afterwards.

What does the minimum 5-year parts warranty require from me?

That is answered from the approved written terms for your project. It involves being covered by our service and maintenance programme, and may also require product registration, servicing at a stated interval and other conditions. Ask for the terms in writing with your quotation.

Do you handle the electrical work?

How the electrical supply and isolation are handled, and who carries that work out, is confirmed for each project. Your quotation should state clearly what electrical work is included and what is excluded, so there is no gap between trades.

Will you make good after core drilling?

The making good position belongs in the quotation. Ask what will be sealed, what will be filled and what is excluded, so that you know before work starts whether any decorating is left to you.

Commercial air conditioning

Zones, occupancy, access and programme on a working commercial premises.

Read about commercial air conditioning

Domestic air conditioning

What an assessment looks at in a home, and how a house installation is planned.

Read about domestic air conditioning

Servicing and maintenance

What happens after handover, and what the warranty is likely to require.

Read about servicing and maintenance

Request a quote

Request an Air Conditioning Installation Quote

Tell us whether the property is commercial or domestic, which rooms are involved and where it is. Photographs can be sent after the first conversation where they help.

Rather talk it through

07845 233091. Air Conditioning Direct.

Based near Dromore, County Down. Serving Belfast and Northern Ireland.

Enquiry and attendance hours are being confirmed and will be published here once they are. Until then, call and leave a message if there is no answer.

Everything is needed unless it says optional.

Used to confirm coverage. Please give the full postcode.

Is this a domestic or a commercial enquiry?

For example, as soon as possible, or before the summer.

Which rooms you are thinking about, or the manufacturer, model and number of units if the system already exists.

Complete the security check above if it asks you to, then Send unlocks by itself. Or call Philip on 07845 233091 or John on 07709 357452.

Prefer to talk it through? Call us on 07845 233091 (Philip) or 07709 357452 (John).

Call us on 07845 233091. Air Conditioning Direct.Request a quote